Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

SBPBGMB

Power Rewind Reels

To handle single 1" through 1-1/2" I.D. hose

LP Gas / Propane / Refueling


  • "SB" prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction.
  • Choose #40 chain and sprocket drive powered by an electric, hydraulic, or compressed air motor or direct drive hydraulic rewind motor.  
  • Auxiliary crank rewind standard on DPB Series reels. Available on PB Series power rewind reels, at extra cost.  
  • Direct drive hydraulic rewind reels supplied with pinion brake. Electric powered rewind reels supplied with strap brake.
  •  Other brake and locking devices may be specified. See Ordering & Accessory Guide.
  • Standard inlet: 90° ball bearing swivel joint with 1-1/2" female NPT threads.  
  • Standard outlet: flanged riser with 1" female NPT threads.  
  • Standard inlet, outlet riser, and hub assembly are steel.  
  • Other sizes and/or threads can be furnished and must be specified.  
  • Pressures to 350 psi (24 bar).  
  • Temperatures from -40° F to +350° F (-40° C to +177° C).  
  • Consult factory for other pressures and temperatures.
  • Chain guard available upon request, must be specified.  
  • Assembly B bottom wind roller is standard.

@ Email this page
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing

Reel Capacity, Dimensions and Details

Reel Capacity:

Show:


Rewind Option:

Show:

Measurements: Standard / Metric
MODEL REEL CAPACITY (ft / lbs) REEL DIMENSIONS (inches)
Size Length Weight A B C D E F G H X Y Relative Size
SBAPBGMB24-23-24 1 ID 125 154 21 15.5 10.5 20.5 22.75 29.25 23.5 12.12 13 16.75
SBAPBGMB30-23-24 1 ID 150 164 27.5 22 10.5 20.5 22.75 35.75 23.5 12.12 19.5 16.75
SBAPBGMB26-25-26 1 ID 150 184 23 17.5 10.5 25.5 24.75 31.25 27.88 15.5 15 21.75
SBAPBGMB28-25-26 1 ID 200 208 25.5 20 10.5 25.5 24.75 33.75 27.88 15.5 17.5 21.75
SBAPBGMB22-30-31 1 ID 250 156 19 13.5 10.5 25.5 28.75 27.25 29.88 15.5 11 21.75
SBAPBGMB18-33-34 1 ID 200 158 14.5 9.5 10.5 31.5 31.75 23.75 33.62 17.75 7 27.75
SBEPBGMB24-23-24 1 ID 125 174 21 15.5 10.5 20.5 22.75 29.25 23.5 12.12 13 16.75
SBEPBGMB30-23-24 1 ID 150 184 27.5 22 10.5 20.5 22.75 35.75 23.5 12.12 19.5 16.75
SBEPBGMB26-25-26 1 ID 150 204 23 17.5 10.5 25.5 24.75 31.25 27.88 15.5 15 21.75
SBEPBGMB28-25-26 1 ID 200 228 25.5 20 10.5 25.5 24.75 33.75 27.88 15.5 17.5 21.75
SBEPBGMB22-30-31 1 ID 250 176 19 13.5 10.5 25.5 28.75 27.25 29.88 15.5 11 21.75
SBEPBGMB18-33-34 1 ID 200 178 14.5 9.5 10.5 31.5 31.75 23.75 33.62 17.75 7 27.75
No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results.
  1. Specifications subject to change.
  2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
  3. Consult factory for reels using 1-1/2" ID hose. 
  4. When ordering power rewind models, prefix model number with: SBA = Air Rewind (supplied with control valve and 25" air hose); SBE = Explosion Proof Electric Rewind (2/3 HP) (supplied with explosion proof switch, solenoid, and junction box); SBHD = Hydraulic Rewind (not supplied with control valve); SBD = Direct Drive Hydraulic Rewind.
  5. When ordering A, HD and D power rewind reels deduct 20 lbs. from ship weight.
  6. Dimension J is maximum, with Guidemaster® in operating position. Dimension K is maximum, with Guidemaster®in traveling position opposite rewind motor, as shown in dimensional drawing. Dimension L is maximum, with Guidemaster® in traveling position on same side as rewind motor.
  7. Guidemaster® weight is approximately 21 lbs. Guidemasters® are shipped as parts.
  8. Be sure to check dimensions and weights prior to ordering. 

Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.

Request a Quote

To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.

Please review our updated privacy policy containing details on how we collect and use your personal information.

Top