Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

PW-2

Manual Rewind Reels

To handle single 3/8" and 1/2" I.D. hose

Pressure Washing / Steam Cleaning / Spray Operations / Washdown


  • Lightweight, compact, and versatile; designed for mobile and portable pressure wash equipment.
  • Permanent direct crank rewind.
  • Adjustable split bearing brake assembly.
  • Standard inlet: full-flow swivel joint with 1/2" NPT fitting.
  • Standard outlet: 1/2" female NPT fitting, supplied with 1/2" MNPT to 3/8" FNPT reducing bushing.
  • Other sizes and/or threads can be furnished and must be specified.
  • Pressures up to 5000 psi (345 bar). Flow rate of over 12 gpm @ 15 fps.
  • Standard fluid temperatures from +32° F to +400 °F (0° C to +204° C). Optional temperature ratings available - consult factory.
  • Optional mounting kits available, specify mounting position when ordering.
  • Captive (4-sided) hose guide roller assembly.
  • Black powder coat finish.


Model shown in image above represents standard configuration


@ Email this page
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information

Reel Capacity, Dimensions and Details

Reel Capacity:

Show:


Rewind Option:

Show:

Measurements: Standard / Metric
MODEL REEL CAPACITY (ft / lbs) REEL DIMENSIONS (inches)
Size Length Weight A B C D E F G H X Y Relative Size
PW-2 3/8 ID 125 26 9 6 6 4.5 16.75 17 18.25 10 5 2.75
PW-2 1/2 ID 75 26 9 6 6 4.5 16.75 17 18.25 10 5 2.75
No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results.
  1. Specifications subject to change.
  2. Be sure to check dimensions and weights prior to ordering.

Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.

ISO Parts Drawing

ISO-193 PW-2 (Crank Rewind)

Request a Quote

To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.

Please review our updated privacy policy containing details on how we collect and use your personal information.

Top