2400
Manual (MX) or Power Rewind Gas Welding Reels
To handle twin 1/4" through 3/8" welding hose
Oxy / Fuel Welding
- MX chain drive crank rewind or powered by a compressed air or hydraulic motor.
- MX rewind reels supplied with pinion brake.
- Power reels not supplied with brake.
- Standard inlets: 90° ball bearing swivel joints with 1/2" female NPT threads. Oxy/acet brass inlet adapters are available.
- Standard outlets: are male 9/16"-18 threads. Right hand for oxygen, left hand for gas.
- Rollers may be purchased. Specify roller position (mounting brackets are necessary).
- Pressures to 300 psi (21 bar).
- Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C). Optional temperature ratings available - consult factory.
- Type of gas used MUST be specified.
Models shown above represent standard configuration
Left: manual rewind (MX), Right: air rewind (A)
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information
Reel Capacity, Dimensions and Details
Reel Capacity:
Show:
Rewind Option:
Show:
Measurements: Standard / Metric
| MODEL | REEL CAPACITY (ft / lbs) | REEL DIMENSIONS (inches) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Weight | A | B | C | D | E | F | G | H | X | Y | Relative Size | |
| A2414-17-18 | 1/4 ID | 100 | 46 | 11 | 6 | 6 | 14.12 | 19 | 18.5 | 18.12 | 9.88 | 9.5 | 10 | |
| A2414-17-18 | 3/8 ID | 75 | 46 | 11 | 6 | 6 | 14.12 | 19 | 18.5 | 18.12 | 9.88 | 9.5 | 10 | |
| A2416-17-18 | 1/4 ID | 150 | 47 | 13 | 8 | 6 | 14.12 | 19 | 20.5 | 18.12 | 9.88 | 11.5 | 10 | |
| A2416-17-18 | 3/8 ID | 100 | 47 | 13 | 8 | 6 | 14.12 | 19 | 20.5 | 18.12 | 9.88 | 11.5 | 10 | |
| A2420-17-18 | 3/8 ID | 150 | 49 | 17 | 12 | 6 | 14.12 | 19 | 24.5 | 18.12 | 9.88 | 15.5 | 10 | |
| A2426-17-18 | 3/8 ID | 200 | 51 | 23 | 18 | 6 | 14.12 | 19 | 30.5 | 18.12 | 9.88 | 21.5 | 10 | |
| MX2414-17-18 | 1/4 ID | 100 | 31 | 11 | 6 | 6 | 14.12 | 19.12 | 24.5 | 18.12 | 9.88 | 9.5 | 10 | |
| MX2414-17-18 | 3/8 ID | 75 | 31 | 11 | 6 | 6 | 14.12 | 19.12 | 24.5 | 18.12 | 9.88 | 9.5 | 10 | |
| MX2416-17-18 | 1/4 ID | 150 | 32 | 13 | 8 | 6 | 14.12 | 19.12 | 26.5 | 18.12 | 9.88 | 11.5 | 10 | |
| MX2416-17-18 | 3/8 ID | 100 | 32 | 13 | 8 | 6 | 14.12 | 19.12 | 26.5 | 18.12 | 9.88 | 11.5 | 10 | |
| MX2420-17-18 | 3/8 ID | 150 | 34 | 17 | 12 | 6 | 14.12 | 19.12 | 30.5 | 18.12 | 9.88 | 15.5 | 10 | |
| MX2426-17-18 | 3/8 ID | 200 | 36 | 23 | 18 | 6 | 14.12 | 19.12 | 36.5 | 18.12 | 9.88 | 21.5 | 10 | |
| No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results. | ||||||||||||||
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
- Dimension "F" is the overall length of standard model reels. On crank rewind models, the dimension shown is with the crank in rewind position. Reels require 2" clearance to remove crank handle.
- When ordering power rewind models replace MX prefix with:
A = Air Rewind (supplied with control valve and 18" air hose)
HD = Hydraulic Rewind (not supplied with control valve) - Be sure to check dimensions and weights prior to ordering.
Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
Request a Quote
To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.